Characteristics
| Delivery Head: м, max | 36.6 - 12,9 |
| Capacity: М3, max | 3.6 - 18 |
| Operating Temperature, t C | -10 - +90°C |
| Engine work, KW | 0.55-7.5 |
| Suction Flange DN | G 1 1/2 ,G2, G3 |
| Discharge Flange: DN | G 1 1/2 ,G2, G3 |
| Material | cast iron, bronze |
| Engine speed RPM | 2900 RPM |
Description
Self-priming pumps CALPEDA A series are designed for pumping clean or slightly contaminated water with a temperature of up to 90 C. with suspended solids with a diameter of up to 15 mm. The pump has a built-in check valve and self-primes even if it is partially filled. CALPEDA A is ideal for draining canals, baths or tanks of treatment facilities. Use in everyday life, industry, gardening and irrigation.
Design of Calpeda A pumps
-
Self-priming monoblock centrifugal pumps with open impeller Calpeda A.
-
Calpeda A has a device that protects against reverse suction, built into the suction bell, prevents the formation of a reverse suction effect when stopped and ensures repeated self-priming each time it is turned on.
-
The Calpeda A pump self-primes even if it is partially filled with liquid and the suction pipe is completely empty.
Calpeda A- three-phase motor 2900 rpm.
Calpeda AM- single-phase motor 230 V. 2900 rpm.
Application of Calpeda A pumps
-
For clean or slightly contaminated water with suspended solids up to 10 mm in diameter.
-
For draining bathtubs or canals.
-
For irrigation.
-
For use in domestic and industrial areas.
Operating limits of Calpeda pumps A
-
Ambient air temperature no more than 40°C.
-
Maximum permissible final pressure in the pump body: 6 bar.
-
Continuous operation mode