Gear pumps of the APF series are monoblock devices designed for pumping lubricating fluids - oils, bitumen, glue, resins, fats. The viscosity of the working fluid should not exceed 600 cSt, the temperature - not higher than 240 degrees. The main feature of the device is the monoblock design: the engine and the working chamber are connected directly to each other. The pump can be equipped with a single- or three-phase engine.
Monoblock gear pumps of the BMF, BCF series pump mainly liquids without solid inclusions, such as oils, bitumen, adhesives, resins, fats, etc., with a viscosity of up to 700 cSt and a temperature of up to 240° (Special design). The engine is connected to the working chamber directly. It is equipped with single-phase (220 V) and three-phase (380 V) engines.
Gear pumps B, MBM are used mainly for pumping liquids without solid inclusions, such as oils, bitumen, adhesives, resins, fats, etc., with a viscosity of up to 700 cSt and a temperature of up to 240° (Special design). Structurally, they are made on a plate with a connection to the engine through a coupling. They are equipped with single-phase (220 V) and three-phase (380 V) engines.
Gear pumps of the IF series are designed for pumping various cosmetics, edible fats and their derivatives, solvents, acid and alkaline solutions and other liquids with low viscosity without solid inclusions, and temperatures up to 200° (Special design). Equipped with single-phase (220v) and three-phase (380v) motors.
Gear pumps BC, MBMC with a heating jacket are used mainly for pumping liquids with solidification properties, such as bitumen, adhesives, resins, varnishes, etc., when the product must be constantly heated so as not to lose its properties and not harden.
Most often, such equipment is used for pumping liquids characterized by lubricating properties. We are talking about a medium in which there are solid inclusions. Pumping of oil, bitumen, glue, resin, fat is permissible. In this case, the medium must have a viscosity of up to 700 cSt and a temperature of up to +240 ° C. The characteristic features include a monoblock design. The engine is connected to the working chamber directly. An elastic coupling is used as a connector. Additionally, a conical bell is included in the design. It allows the pump to be equipped with different engines. Installation of a single-phase or three-phase power unit is permissible.
