Characteristics
Delivery Head: м, max | 100 m. |
Capacity: М3, max | 550 m3 |
Operating Temperature, t C | -10°C / +140°C |
Engine work, KW | up to 90 |
Suction Flange DN | DN40...DN200 |
Discharge Flange: DN | DN40...DN200 |
Material | cast iron, steel |
Engine speed RPM | 1450-2950 RPM |
Description
Monoblock pumps with direct connection to the engine are designed for pumping clean liquids containing abrasive particles up to 0.1 mm in size and a concentration of up to 0.2%. temperature up to 140 °C Used in water supply and heat supply.
Pump design
- Single-stage monoblock centrifugal pumps with a closed impeller, with sockets of the same diameter located in one line, which can be connected to a straight pipe
- The pump impeller is located on the motor shaft and is supported by bearings.
- The shaft seal is provided by a mechanical seal.
- The pumps are equipped with electric motors in accordance with VDI standards and IEC size
- Thanks to the removable rear design of the pumps, the motor, bearing seal, bearings, impeller can be dismantled without separating the volute from the pipeline.
- The suction and discharge flanges comply with EN 1092-2 / PN 16.