Characteristics
Delivery Head: м, max | 140 m. |
Capacity: М3, max | 1700 m3 |
Operating Temperature, t C | -10 °C / +120 °C |
Engine work, KW | up to 250 |
Suction Flange DN | DN 50 .. DN 500 |
Discharge Flange: DN | DN 32 .. DN 250 |
Material | cast iron, steel, bronze |
Engine speed RPM | 1000-3000 |
Description
Console-type pumps on a frame, with a closed impeller, are designed for pumping clean liquids containing abrasive particles up to 0.1 mm in size and a concentration of up to 0.2%. and temperatures up to 120 °C. cantilever type are used in water supply and heat supply, in fire extinguishing systems, in agriculture.
- Centrifugal pumps with horizontal shaft, with axial suction and closed impeller.
- Dimensions of the housing comply with TS standards EN 733.
- Sealed ball bearings that do not require maintenance.
- Shaft seal is mechanical or gland seal, as necessary and according to the type of pumped liquid
- Dimensions of non-standard models may differ from models of other manufacturers.
- Suction and discharge flanges comply with EN 1092-2 / PN 16.
- Due to the removable rear design, the bearing group, bearing seals, pump shaft and the impeller can be replaced without separating the pump working part from the pipelines
- All impellers are dynamically balanced according to ISO requirements
- Axial force is balanced by the rear compensation ring / balancing of the hole system.