MOZER

Mozer pumps are popular in many countries around the world. The company itself was founded in 1996. Its main production sites are located in Italy. This is a huge enterprise, which is spread over an area of 1,700 square meters. Qualified employees work here, who undergo a strict selection process.

You can buy Mozer pumps for both domestic and industrial purposes. The equipment manufactured by the company is used in the following industries:

energy;
oil enterprises;
water supply;
treatment facilities.

All products undergo strict control before reaching the buyer. Since the production sites are located in Europe, the pumps are tested for compliance with international quality standards.

The main principle of Mozer is to be the first among the best. Therefore, the equipment that is manufactured here is constantly modernized and improved. This has allowed the company to maintain a leading position in its market segment for many years. All products are covered by a warranty. And a wide network of service centers helps to quickly eliminate problems associated with improper operation of equipment and unforeseen circumstances.

Centrifugal pumps

Open impeller centrifugal pump

MOZER centrifugal pump with open impeller, suitable for transferring liquids containing solid non-filamentary suspensions. MOZER are suitable for use in the chemical industry, food industry, pharmaceutical industry, paper industry, etc.

Centrifugal pump for highly dirty liquids

MOZER horizontal centrifugal pumps with a vortex impeller of the MRV series pump liquids containing suspended and fibrous particles of 90% of the diameter of the passage, concentration up to 7%, temperature up to 110 °C. MOZER pumps can be used in the paper, sugar and food industries, pumping wastewater, etc.

Gear pumps

Gear pumps BMF, BCF

Monoblock gear pumps of the BMF, BCF series pump mainly liquids without solid inclusions, such as oils, bitumen, adhesives, resins, fats, etc., with a viscosity of up to 700 cSt and a temperature of up to 240° (Special design). The engine is connected to the working chamber directly. It is equipped with single-phase (220 V) and three-phase (380 V) engines.

Gear pumps on B frame, MBM

Gear pumps B, MBM are used mainly for pumping liquids without solid inclusions, such as oils, bitumen, adhesives, resins, fats, etc., with a viscosity of up to 700 cSt and a temperature of up to 240° (Special design). Structurally, they are made on a plate with a connection to the engine through a coupling. They are equipped with single-phase (220 V) and three-phase (380 V) engines.

Gear pumps for low viscosity liquids IF

Gear pumps of the IF series are designed for pumping various cosmetics, edible fats and their derivatives, solvents, acid and alkaline solutions and other liquids with low viscosity without solid inclusions, and temperatures up to 200° (Special design). Equipped with single-phase (220v) and three-phase (380v) motors.

Gear pumps with heating jacket BC, MBMC

Gear pumps BC, MBMC with a heating jacket are used mainly for pumping liquids with solidification properties, such as bitumen, adhesives, resins, varnishes, etc., when the product must be constantly heated so as not to lose its properties and not harden.

BFC Extended Shaft Gear Pumps

Most often, such equipment is used for pumping liquids characterized by lubricating properties. We are talking about a medium in which there are solid inclusions. Pumping of oil, bitumen, glue, resin, fat is permissible. In this case, the medium must have a viscosity of up to 700 cSt and a temperature of up to +240 ° C. The characteristic features include a monoblock design. The engine is connected to the working chamber directly. An elastic coupling is used as a connector. Additionally, a conical bell is included in the design. It allows the pump to be equipped with different engines. Installation of a single-phase or three-phase power unit is permissible.