Construction and industrial equipment
Consultation
Delivery
Warranty
Service

CALPEDA

Calpeda pumps are considered to be among the best of their kind. The company itself has been known in the pumping equipment market for over 50 years. The peculiarity of Calpeda is that before presenting a new model, the company's specialists always conduct a complete study. As a result, each sample of equipment turns out to be special and consistently high-quality. 

Today, the company employs more than 250 employees who are engaged in the production of the following types of pumps:

  1. Calpeda centrifugal pumps. Their operating principle is based on centrifugal force. This type is considered one of the most common. 

  2. Multistage. One of the varieties of centrifugal design. However, here the liquid passes through several stages. Due to this, a strong pressure is obtained at the outlet. Therefore, multistage pumps are common in industrial enterprises. 

  3. For swimming pools. The peculiarity of this type of equipment is that it not only pumps liquid, but also cleans it from foreign inclusions. 

  4. Self-priming. They are designed to pump liquid from one container to another. However, they can also be used to fill reservoirs from natural reservoirs. 

These are the main, but far from the only types of pumps that Kalpeda produces. For example, in the organization's product catalog you can find equipment of circular, submersible, borehole and other varieties.

Centrifugal pumps
Centrifugal cantilever pump on a frame of the N, N4 series
Centrifugal cantilever pump on a frame of the N, N4 series
Centrifugal cantilever pump on a frame of the N, N4 series

The centrifugal console pump Calpeda N, N4 on a frame with a closed impeller is designed for pumping clean liquids containing abrasive particles up to 0.1 mm in size, with a concentration of up to 0.2% and a temperature of up to 120 °C. The pumps are used in water supply and heat supply, in fire extinguishing systems, and in agriculture.

Centrifugal monoblock pump NM, NMS
Centrifugal monoblock pump NM, NMS
Centrifugal monoblock pump NM, NMS

The centrifugal monoblock pump is made of cast iron with flange connection. The pumps are perfect for pumping clean liquids containing abrasive particles up to 0.1 mm in size, concentration up to 0.2%. Temperature up to 120 °C. Monoblock pumps are used in water and heat supply, refrigeration industry, air conditioning, fire extinguishing systems, and agriculture.

In-line centrifugal pump NR, NRD, NR4
In-line centrifugal pump NR, NRD, NR4
In-line centrifugal pump NR, NRD, NR4

A single-block pump with direct connection to the engine is designed for pumping clean liquids containing abrasive particles up to 0.1 mm in size, concentration up to 0.2%, temperature up to 140 °C. They are used in water supply and heat supply.

Centrifugal monoblock pump NM, NMD with threaded nozzles
Centrifugal monoblock pump NM, NMD with threaded nozzles
Centrifugal monoblock pump NM, NMD with threaded nozzles

A single-block pump with a double impeller pumps clean liquids containing abrasive particles up to 0.1 mm in size, with a concentration of up to 0.2%. Temperatures up to 140 °C. Centrifugal single-block pumps have a direct motor-pump connection with a common shaft. The pump body has an axial suction branch and an upper radial delivery bell. The pumps have a threaded connection. They are used in water and heat supply, in fire extinguishing systems, and in agriculture.

Centrifugal pump series C with open impeller and threaded connection
Centrifugal pump series C with open impeller and threaded connection
Centrifugal pump series C with open impeller and threaded connection

The centrifugal pump with an open impeller has a threaded connection. The pumps have a direct connection of the motor-pump with a common shaft. Due to the design, the pump has compact dimensions. The body and working parts of the pump are made of cast iron. The pumps are ideal for pumping liquids with a medium content of impurities and emulsions.

Centrifugal pump series T, TP with peripheral impeller
Centrifugal pump series T, TP with peripheral impeller
Centrifugal pump series T, TP with peripheral impeller

A single-block centrifugal pump with a peripheral impeller and threaded connections. The compact design of the pumps allows them to be used in places with limited space. The impellers are made of brass. The body and working parts of the pump are made of cast iron. The pumps are ideal for pumping clean liquids without abrasive particles that are not aggressive to pump materials. Upon request, you can buy a pump in bronze.

Multistage pumps (Sectional)
Multistage vertical pump made of stainless steel AISI 304, 316
Multistage vertical pump made of stainless steel AISI 304, 316
Multistage vertical pump made of stainless steel AISI 304, 316

Centrifugal vertical multistage pumps made of stainless steel with inlet-outlet connection in line. The pumps are specially designed for pumping clean water where high pressure and little space for installation are required. The pumps are used in industry, housing and communal services systems and fire extinguishing systems.

Multistage pumps MXH, MXHL made of stainless steel AISI 304, 316
Multistage pumps MXH, MXHL made of stainless steel AISI 304, 316
Multistage pumps MXH, MXHL made of stainless steel AISI 304, 316

Multistage pumps are available with motors from 0.33 kW to 7.5 kW and a head of up to 90 m. The monoblock pumps are made of stainless steel and have a direct motor-pump connection. The pumps are ideal for pumping clean or slightly aggressive liquids in food and refrigeration systems, water supply and other household needs. And also where it is necessary to increase the pressure in the system.

Self-priming pumps
CALPEDA self-priming pump for dirty water series A
CALPEDA self-priming pump for dirty water series A
CALPEDA self-priming pump for dirty water series A

Self-priming pumps CALPEDA series A are designed for pumping clean or dirty water with a temperature of up to 90 C. with suspended solids with a diameter of up to 15 mm. The pump has a built-in check valve and self-primes even if it is partially filled. CALPEDA A is ideal for draining canals, baths or treatment plant tanks. Use in everyday life, industry, gardening and irrigation.

Self-priming liquid ring pump CA series
Self-priming liquid ring pump CA series
Self-priming liquid ring pump CA series

The centrifugal liquid ring self-priming pump CALPEDA CA is made in a monoblock body with threaded nozzles. The compact design of the CALPEDA CA pump allows it to be used in places with limited space. The star-type impeller with an anti-blocking ring is made of brass. The body and working parts of the pump are made of cast iron. The pumps are perfect for pumping clean liquids without abrasive particles that are not aggressive to pump materials. Upon request, you can buy a CALPEDA CA pump in bronze.

Self-priming pump CALPEDA NGX
Self-priming pump CALPEDA NGX
Self-priming pump CALPEDA NGX

Calpeda NGX is a self-priming monoblock pump made of stainless steel and brass. This model is equipped with a built-in injector: its operation is possible even at height or in confined spaces, due to its small size. The scope of use of Calpeda NGX equipment is pumping clean, slightly contaminated liquid.